<nav id="lsxvy"><video id="lsxvy"></video></nav>

      <th id="lsxvy"><sup id="lsxvy"></sup></th>
    1.       
          IN'S Linear Ball Bearing
          Flanged Slide Bearing
          Super Linear Ball Bearing
          IN'S Linear Ball Bearing System Case Unit
          IN'S Linear Ball Bearing System Support Rail Unit
          IN'S Linear Ball Bearing System Shaft Support
          IN'S Linear Ball Bearing System SM Shaft
          IN'S Linear Ball Bearing System Interchangeability list
          IN'S Linear Ball Bearing System Tolerances for inside diameter of housing
             
       

      Fine Shaft

             The IN'S fine shaft is standardized as the most frequently used slide shafts with the IN'S linear bush. The diversification of industrial needs for rationalization, energy conservation, lower cost, etc. is proceeding rapidly. In such an environment, IN'S Fine Shafts are mass produced to maintain the highest quality and accuracy while lowering the component cost.
       
      Part number
      Outer Diameter
      Length
      L

      mm
      Mass
      kg/m
      D
      mm
      Tolerance
      g6
      μm
              100     200      300       400      500       600       800     1000     1200     1500     1800     2000
      SF 6
      6
      -4/-12
      100
      600
      0.23
      SF 8
      8
      -5
      -14
      800
      0.40
      SF 10
      10
      200
      1000
      0.62
      SF 12
      12
      -6
      -17
      1500
      0.89
      SF 13
      13
      1.04
      SF 16
      16
      300
      2000
      1.58
      SF 20
      20
      -7
      -20
      2.47
      SF 25
      25
      400
      3.85
      SF 30
      30
      5.55
      SF 35
      35
      -9
      -25
      500
      7.55
      SF 40
      40
      9.87
      SF 50
      50
      600
      15.4
        Materialhigh-carbon chromium bearing steel SUJ 2)       hardnessHV 697(60 HRC)or more
       
      Part number
      Outer Diameter
      Inner diameter
      d
      mm
      Length
      L

      mm
      Mass
      kg/m
      D
      mm
      Tolerance
      g6
      μm
              100     200      300       400      500       600       800     1000     1200     1500     1800     2000
      SFH 6
      6
      -4/-12
      2
      100
      400
      0.20
      SFH 8
      8
      -5
      -14
      3
      600
      0.34
      SFH 10
      10
      4
      200
      1000
      0.52
      SFH 12
      12
      -6
      -17
      5
      1500
      0.73
      SFH 13
      13
      6
      0.82
      SFH 16
      16
      8
      300
      2000
      1.18
      SFH 20
      20
      -7
      -20
      10
      1.85
      SFH 25
      25
      15
      400
      2.46
      SFH 30
      30
      16
      3.97
      SFH 35
      35
      -9
      -25
      19
      500
      5.32
      SFH 40
      40
      20
      7.39
      SFH 50
      50
      26
      600
      11.3
        Materialhigh-carbon chromium bearing steel SUJ 2)       hardnessHV 697(60 HRC)or more
      Part number
      Outer Diameter
      Length
      L

      mm
      Mass
      kg/m
      D
      mm
      Tolerance
      g6
      μm
                100     200      300       400       500       600       800      1000      1200     1500     1800     2000
      SSF 6
      6
      -4/-12
      100
      600
      0.33
      SSF 8
      8
      -5
      -14
      800
      0.39
      SSF 10
      10
      200
      1000
      0.61
      SSF 12
      12
      -6
      -17
      1500
      0.88
      SSF 13
      13
      1.03
      SSF 16
      16
      300
      2000
      1.56
      SSF 20
      20
      -7
      -20
      2.43
      SSF 25
      25
      400
      3.80
      SSF 30
      30
      5.48
      SSF 35
      35
      -9
      -25
      500
      7.23
      SSF 40
      40
      9.44
      SSF 50
      50
      600
      15.2
       MaterialMatensite stainless steel (equivalent to SUS 440C)   hardnessHV653(58HRC)or more,HV613(56HRC)or more for Ø3-6
       
      Part number
      Outer Diameter
      Length
      L

      mm
      Mass
      kg/m
      D
      mm
      Tolerance
      g6
      μm
                  500    1000    1500  2000   2500   3000  3500  4000  4500    5000    5500   6000
      SFS/SFSC
      2
      -2
      0.02
      SFS/SFSC
      3
      -8
      0.06
      SFS/SFSC
      4
      -4
      -12
      0.10
      SFS/SFSC
      5
      0.16
      SFS/SFSC
      6
      0.23
      SFS/SFSC
      7
      -5
      -14
      0.30
      SFS/SFSC
      8
      0.40
      SFS/SFSC
      9
      0.50
      SFS/SFSC
      10
      0.62
      SFS/SFSC
      11
      0.75
      SFS/SFSC
      12
      0.89
      SFS/SFSC
      13
      1.04
      SFS/SFSC
      14
      1.21
      SFS/SFSC
      15
      1.39
      SFS/SFSC
      16
      1.56
      SFS/SFSC
      17
      1.78
      SFS/SFSC
      18
      2.00
      SFS/SFSC
      19
      -17
      -20
      2.23
      SFS/SFSC
      20
      2.47
      SFS/SFSC
      22
      2.98
      SFS/SFSC
      25
      -7
      3.85
      SFS/SFSC
      28
      -16
      4.83
      SFS/SFSC
      30
      5.55
      SFS/SFSC
      32
      -9
      6.31
      SFS/SFSC
      35
      7.55
      SFS/SFSC
      38
      -25
      8.90
      SFS/SFSC
      40
      9.87
      SFS/SFSC
      45
      12.50
      SFS/SFSC
      50
      15.40
      SFS/SFSC
      55
      -10
      18.70
      SFS/SFSC
      60
      22.20
      SFS/SFSC
      65
      26.65
      SFS/SFSC
      70
      -29
      30.20
      SFS/SFSC
      75
      34.70
      SFS/SFSC
      80
      39.40
      SFS/SFSC
      85
      -12
      44.50
      SFS/SFSC
      90
      50.00
      SFS/SFSC
      95
      -34
      55.60
      SFS/SFSC
      100
      61.70


      Chemical composition of S45C Material
      S 45C
      C
      Si
      Mn
      P
      S
      Cu
      Ni
      Cr
      Mo
      0.420.48
      0.150.35
      0.60.9
      0.030.012
      0.010.03
      0.10.3
      0.060.2
      0.060.2
      0.145
        RockwellHRC 54-56                        Order Lenght500mm-3000 mm(6.000 mm)
        RoughNess0.6S-1.5S Rmax(μm)         Straigtness60(30μm/m)
        Tolerance96                             Roundess96(6-17μm/m)
         Out DiameterØ2-Ø100                     Cylindericity4-14μm(Ø2-Ø100)
       
                                                                                                   Copyright  © 2007 Silverstone machinery industry Co.,Ltd. All Right Reserved.                                                       Design:enxun.com
      国语自产精品视频在-国自产拍在线天天更新-高清国语自产拍免费,国产精品自产拍在线观看中文